Increase Internal space of any Android device

Hey peeps this a new way of increasing your android's internal memory/space as:

by Lucas Zallio

Old method had lots of bugs and most of the apps gave force close errors like play store app, and sometimes due to which the mobile restarted automatically and app stopped responding.

Now the new method has solved the issue.

You will need to enable the init.d support on your device and then a mod will be applied.Also make sure your device is rooted. If you don't know how you can check this post with is very simple and easy. How to root any android device easily

Features in the new Mod:

The Mod is called INT2EXTV2+. It is also a cron mod similar to the older one but bug has been fixed. It has following features:

-Mounts /sd-ext to /data
-Leaves /data/data on internal for speed
-Works with EXT 2/3/4 filesystems
-Zip Aligns /data/app on every boot
-No symlinks
-Supports SWAP2INT
-Completely universal

Lets Begin with the installation:

Step 1: Preparing the Device.

1. Make a Nandroid backup using CWM.
2. after backup Mounts & storage > format /system,
3. Wipe/Data 
4. Wipe cache
5. wipe dalvik
6. wipe battery stats.
7. Advanced > partition SD card
8. ext partition as 1024MB (Not more than 1024 else your device will be slow),
9. swap partition as 512MB
10. Complete the partitioning.
11. Now install a new ROM that you want to use.
12. After installation Reboot the Device.
13. Now Install Titanium Backup (Download here)
14. and remove link2SD.
15. Device is ready for step 2.

Step 2: Setting Up Busybox

1. Download BusyBox from this link 
2. and install it
3. Proceed to step 3..

Step 3: Setting up Init.d support in the device.

We will use this Uni-init v1.0.apk to give init.d support to your device. 

1. Install Uni-init apk
2. Click on Activate
3. click on verify to Check if it is installed or not.
4. Now download and copy Aroma_kernel.zip to your sd card.
5. Reboot to CWM
6. Install from SD card
7. Choose from SD card
8. select Aroma_kernel.zip and flash it
9. Reboot the device
10. Proceed to step 4.

Step 4: Applying INT2EXTV2+ suport on the device.

1. Download the INT2EXTV2+.zip 
2. Copy the downloaded file to your SD card
3. Reboot to CWM recovery
4. and flash it
5. Reboot the device

Note: During this reboot the device will take time it may hang during reboot and you may need to pull out the battery but you must wait for at least 20 Minutes before pulling out the battery. Just have patience.

After Reboot you must see that you have got about 800 MB+ of storage available.

Comment, Share, Follow !! :)